Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
Zi-400 Industrial is an innovative Australian manufactured industrial cleaner formulated on advanced corrosion inhibiting technology. Environmentally safe and biodegradable, Zi-400 is scientifically proven to not only provide powerful corrosion protection, but to also arrest existing corrosion where it has started to occur. Zi-400 is a game changer in preventative maintenance and should be regularly implemented to address the problem of corrosion on Industrial assets.
This biodegradable, quick-break degreasing, multi-application cleaner comes as a high concentrate allowing you to dilute to your specific needs and boasts an impressive shelf life of five (5) years from Date of Manufacture.
Use Zi-400 Industrial regularly to significantly enhance your preventative maintenance program to protect against corrosion, which will improve both the integrity of assets with current corrosion issues providing a longer and more reliable service life and help protect against catastrophic failures.
Investigated and tested by both the Australian Defence Force (ADF) and Deakin University in Melbourne in highly corrosive inducing chloride environments, Zi-400 is shown to significantly benefit both Aluminium Alloys and Steel from corrosion initiation and largely reduce existing corrosion between 50% to up to a factor of 10 times.
Zi-400 Industrial is highly effective against:
In 1993, the ADF found Zi-400 to be the best product for its cleaning and corrosion management properties out of 19 aviation approved cleaners tested. During testing it was shown that Zi-400 was able to prevent the initiation of filiform corrosion for more than 10 days in a submerged seawater simulated environment and still after 20 days in the same environment was able to keep filiform corrosion down to microscopic levels enhancing the performance of a clear epoxy polyamide film coating of 50µm dry film thickness by roughly 31 times than the same materials without Zi-400.
Built on the original Zi-400 Aviation formula, the number 1 cleaner for aviation in Australia, which has been reliably used for more than 27 years, Zi-400 Industrial brings these highly sought after benefits enjoyed by the Australian Defence Force, Commercial Airlines, Search & Rescue, Medivac and General Aviation to the Industrial Market.
Capable of cleaning heavy industrial fouling such as:
And safe on the following surfaces:
For best results, Zi-400 Industrial should be diluted in warm water, although, it can be used in any temperature range, including cold water, ease of cleaning increases with warmer temperature.
Once applied, Zi-400 Industrial should then be agitated to the area being cleaned or the corrosion managed area (whichever the case may be), this will help to accelerate the cleaning process. This can be further optimised by utilising foaming equipment which will assist in the contact time of Zi-400 to the required areas and minimise wastage helping to make your solid investment in Zi-400 Industrial last longer.
Once a dwell time of a few minutes has passed and prior to drying on the work area surface, rinse off with water. As an added benefit, due to the water repelling properties of Zi-400 Industrial, areas where it has been worked onto the surface will dry faster.
More Scientific details and dilution ratios can be obtained by calling our office or using the email link below.
20lt Container Zi-400 Industrial Individual
Dimensions:
Weight:
20lt Container Zi-400 Industrial pallet (32 off)
Dimensions:
Weight:
200lt Drum Zi-400 Industrial Individual
Dimensions:
Weight:
200lt Drum Zi-400 Industrial pallet (4 off)
Dimensions:
Weight: